Expedition Clothing

NEW From Brynje!

DELIVERY 4-6 DAYS

Three layer shell jacket designed in collaboration with leading guides. Robust jacket for the high mountains and on expedition.

The Brynje Expedition Jacket has been three years in the making. Trialled on Expeditions, and especially on the Amundsen race in Norway, and worn by the winning team in 2018. With what has been called the “Best Hood available today”, the jacket has been through several iterations to get it as close too perfect as possible.

The jacket is wind and waterproof and breathable, the jacket is made of Shoeller® WB fromula 3-layer fabric with C-change hydrophilic membrane, water column 20 000 mm. The jacket is treated with Schoeller 3XDRY impregnation ensuring a water-repellent surface for a long time.

This materials used are Bluesign approved.

Materials: Shoeller® WB fromula fabric with C-change hydrophilic membrane.

• Waterproof
• Windproof
• Breathable
• Four way stretch
• Quick-drying
• Large hood with space for helmet, mount for fur trim, four adjustments, wire peak brim.
• High collar with soft chin guard.
• Taped seams.
• Two breast pockets, two large low pockets, one pocket on the left arm, two inner pockets lined with mesh for optimal ventilation.
• YKK waterproof zippers, YKK vislon two-way front zip with storm flap. All water resistant zippers have extra storm flap inside.
• Cuff closure with Velcro and attach the possibility of such gloves
• Airing forearms with two-way zipper.
• Weight: 950 grams in size M
• Produced in Europe

*If you don't see you size available, call us for an alternative product*

The Bergans Antarctic Expedition jacket was designed and tested for the worlds harshest Polar environments. Windproof and water-repellant, the jacket keeps you protected, while offering greater breathability than a fully membraned jacket. This is essential in cold climates where a build up of moisture can be very problematic.

Everything about the jacket has been designed for ease of use. Strong zips, with easy motion, mean there is no energy wasted fighting to open and close them. Long pull tabs mean zips can be operated with Mitts on, and under arm vents help to ventilate when warm.

The Microfiber material means the jacket is also softer and more quiet than other jackets.

Fabric
Windproof and water-repellent microfiber fabric. Good wicking ability and quick-drying.

Hood
Fixed helmet compatible hood. Velcro attachment for artificial fur trim in size L. Wire reinforcement for fit adjustment.

Ventilation
Long underarm zip vents. 2-way zip in front.

Pockets
Front pockets and large chest pockets in mesh for optimum breathability and ventilation. Attachment loops in the pockets. The design ensures that the front pockets do not interfere with the hip belt when you carry a backpack.

Additional features
Crotch strap. Extra durable zip pulls. Double front storm flap with Velcro.

Use
Specially developed for Expedition. 

Fabric: Microfiber: 100 % Polyamide (Nylon)
Weight: 630 g (size L)

DELIVERY 4-6 DAYS

The Brynje Expedition Pant has been three years in the making. Trialled on Expeditions, and especially on the Amundsen race in Norway, and worn by the winning team in 2018. These are the pants that protect you under the most demanding conditions.

Chest high, Elastic Schoeller® Dryskin makes a snug but lightweight fit. A zipper, down to the fly, means you can easily ventilate. Velcro cross straps allow you to tighten or loosen the fit. Two chest height pockets allow for storage of batteries, snacks or anything you want to keep warm! There are two more thigh pockets for additional storage and easy access.

Full length leg zippers provide options for ventilation, and also a drop seat function. There is also a removable gaiter, should you need that option. Reinforced Kevlar on the knees and ankles makes these a robust choice for expeditions

The pants are wind and water resistant and breathable. The pants are made from Shoeller® WB fromula 3-layer fabric with C-change hydrophilic membrane, water column 20 000 mm. The pants are treated with Schoeller 3XDRY impregnation ensuring a water-repellent surface for a long time.

Materials are Bluesign approved.

Materials: Shoeller® WB fromula fabric with C-change hydrophilic membrane.

• Waterproof
• Windproof
• Breathable
• Four way stretch
• Quick-drying
• Taped seams
• Velcro tightening around chest
• Two-way full zipper on the side  provides easy and attire, functionality and adjustment, while external storm flap with Velcro provides additional protection against wind and weather
• Elastic Schoeller® Dryskin material in trousers uppers ensures a snug fit with good freedom of movement, here you also have two practical pockets
• Reinforced with Kevlar fabric on the knees and inside ankle for extra durability
• YKK waterproof zippers
• Weight: 1090 provide size M
• Produced in Europe

NEW 

The Aenergy IN Shorts Men are insulating shorts for an extra layer on cold ski touring days and/or for downhill skiing. Thanks to the zippers on the sides, which are continuous from top to bottom, it is easy to quickly pull on the shorts over ski tour pants at the summit. So the pants provide protection against wind and cold conditions that extends to over the knee. Stretch inserts provide more freedom of movement. The Aenergy IN Shorts Men impress with their lightness and high-quality materials, which include Pertex Quantum and Primaloft. Practical: If needed, the pants can be packed away in the integrated pocket.

A very useful bit of kit. We are also carrying them for expedition teams to use instead of a Down Skirt, to give additional warmth on cold days. They are so simple to put on over your salopettes or shell layer, making them super flexible.

Features

• Very lightweight, water-repellent Pertex® Quantum material with Y Fuse technology for increased downproofing and improved water-pearling
• 80 g/m² Primaloft® Gold Active Insulation for high heat efficiency and quick-drying behavior
• Partial stretch inserts for extra freedom of movement
• Full-length side zippers for putting on or taking off quickly
• Can be stowed away in the inner pocket

Material and Technology

Insulated trousers, articulated at the knee and treated with fluorocarbon-free DWR for protection against the elements, that can either be worn under shell garments or as an additional outer layer. They stretch as you move, and are designed to be comfortable when layered with other garments. Full length zips make ventilation easy, as well as answering the call of nature!

• Fluorocarbon-free DWR-treated face for weather protection
• Insulation with an improved warmth-to-weight ratio
• Smooth stretch material and elastic at waist for minimal bulk and greater comfort under other layers
• Rear hanging loop
• Thigh to hem-length side zips with insulating inner placket for ventilation and easy dressing
• Pre-bent and shaped knees

Fabric:

100% Polyester, Soft yet strong fiberproof 50D plain weave with low fricton for easy layering, 74 g/m², bluesign® approved

Insulation: QuadFusion™ 50% Recycled Polyester, 50% Polyester, warming crimped hollow fibre insulation, 80 g/m², bluesign® approved

Keeping your feet warm plays an important role in maintaining a comfortable temperature throughout the rest of your body. Cold weather camping can be fun if you are warm, but it can also be a miserable experience for those who are unprepared. One of the best ways to maintain comfort in cold weather is to insure that your feet always stay warm and dry. Our lightweight compressible down booties will provide all the warmth and comfort to keep you smiling long after the temperatures drop. Down booties are made for the outdoors, but they are also perfect for anyone with poor circulation or cold feet and it is not surprising that many people wear them at home.

Our Expedition booties add an extra measure of protection against the elements for more severe winter conditions. The Gore Windstopper fabric extends well above the insulation providing full-gaiter protection against the elements. Other features like the additional foam insulation in the heel make this bootie a perfect choice for winter camping or expeditions.

SIZE

S (4-6 or 35-38) ONLY BLACK LEFT

M (6-8 or 39-42) BLACK

L (8-11 or 43-45) BLACK

XL (12 -14 46-48) BLACK

• Average total weight less than 8 ounces per pair
• 800 fill power European goose down insulation
• Gore Windstopper shell fabric for superior moisture protection
• Extended design provides full calf coverage
• Non-slip Toughtek outer sole material
• Durable foam insole with superior thermal insulation
• Insulated heel foam insert
• Internal elastic heel strap for maximum warmth and stability
• Waterproof and durable rand material
• Adjustable elastic draw closure

Weight of size L is 299g

An extremely comfortable and warm BC-boot with an integrated gaiter that is reinforced with Kevlar on exposed areas. The boot has been developed specifically for expeditions and long journeys on skis in extremely cold conditions. Polar A/P/S also has a specially developed last that ensures you have room for liner or wool inner boots and if necessary vapour barrier socks. It also has extra insulation within the sole and liner. The boot has been used on a wide range of expeditions, both to the North and South Poles, however, it is also suitable for simpler expeditions in cold conditions. Liners or wool inner boots and vapour barrier socks are purchased separately. We recommend buying the boot 2 sizes larger than normal for use during extreme conditions.

NOTE: EMAIL FOR SHIPPING COST OUSIDE OF UK

BINDING COMPATIBILITY: Rottefella NNN BC

WEIGTH: 995 g pr shoe/boot (EU 42)

SHAFT HEIGHT: 19.5 cm (EU 42)

GAITER HEIGHT: 44.0 cm (EU 42)

Materials

EXP GAITER (BC)

Integrated gaiters made from durable Cordura. Provides extra insulation during extreme conditions and protects against snow. Extra reinforcement on the inside.

Sole Technologies

BC SOLE

Rottefella BC sole provides optimum stability, which contributes to good control in rough terrain and in variable snow conditions. The sole has good insulation properties.

STANDARD L-BOARD

A moisture absorbing insole with insulating properties to keep your feet dry and warm.

INSULATOR INSOLE

An anatomically designed insole made from insulating felt as well as breathable materials with good absorbency that keep your feet warm and dry. The sole has an antibacterial surface that helps prevent odours.

Fit & Support

EXPEDITION FIT

A specially developed fit that provides enough space for wool inner boots or two pairs of polar socks.

COMBO LACING SYSTEM

A lacing system that combines open and lockable hooks. Allows for individual adjustment of the ankle and forefoot.

Other Features

EASY ENTRY LOOPS

Easy entry loops make the boots easy to take on and off.

INTERNAL HEEL COUNTER

Heel reinforcements made of plastic that provide better support. An ergonomic and stable heel cap locks the foot in the boot, anchors it to the midsole and reduces the risk of blisters.

TOE PROTECTOR

A rubber-coated reinforcement that protects the boot from abrasion.

SNOW CRUST PROTECTOR

Extra layers of full grain leather that protect the lower part of the boot, which is particularly prone to wear, especially in snow with an ice crust.

NOTE: EMAIL FOR SHIPPING COST OUSIDE OF UK 

An extreme ski boot for expeditions and skiing in extremely cold weather.

A comfortable and very warm ski boot that is perfect for the adventurer who will not let extreme cold put a stop to their expedition. The boot features a water repellent Cordura upper with exterior leather reinforcements for added protection and support. The midsole has been manufactured with special rubber that allows it to withstand extreme conditions without cracking. This model is built around a total concept for footwear at low temperatures. The concept consists of a thin polypropylene/nylon sock over the foot, then a vapor barrier or vapor tight sock and finally a wool inner boot or two pairs of polar socks. Wool inner boots and polar socks are purchased separately. We recommend buying the boot 2 sizes larger than normal.

• VIBRAM ® 75 MM - Vibram sole for 75mm standard 3 pin bindings. Can be used with a wire binding
• Midsole - STANDARD L-BOARD. A moisture absorbing insole with insulating properties to keep your feet dry and warm
• Expedition Fit -A specially developed fit that provides enough space for wool inner boots or two pairs of polar socks
• Combo lacing system - A lacing system that combines open and lockable hooks. Allows for individual adjustment of the ankle and fore foot.
• Full grain leather - The best leather quality, with good breathability and a smooth surface that makes it highly durable and water repellent
• Easy entry loops - Easy entry loops make the boots easy to take on and off

BINDING 75 mm

SIZES 38 - 51 (EUR)

WEIGHT 1070 g (SZ 42)

SHAFT HEIGHT 21 cm (SZ 42)

Made by Intuition Liners for Alfa, these are an extremely soft, comfortable and light weight removable EVA inner boot.

Designed to be used in conjunction with the ALFA Polar APS and the ALFA Polar Advanced Boots, for cold weather expeditions.

This light weight liner offers 100% waterproofness, keeping your feet dry in all conditions.  The shaft height supports the shell and provides additional stability.

• Ideal warmth to weight ratio.
• Tongue-style liner,
• No Laces,
• Super Soft Foam Construction,
• Anti-Microbial Lining Treatment.

When purchasing to work with the ALFA Polar A/P/S BC boot, choose a liner which is one size BIGGER than your foot size. The boots should then be TWO sizes up from your foot size

Material: EVA - GORE-TEX® - INSULATED COMFORT FOOTWEAR

100% waterproof, durable and breathable with insulating properties for use in cold weather conditions. Water and snow is blocked, while sweat evaporates from the inside. The insulated lining retains warmth in low temperatures and ensures a dry, warm and comfortable climate for your feet.

Weight: 114g

These Intuition MUKLUK liners can be used with the Alfa Polar APS boot, or similar.. These super soft, medium thickness liners are a favourite model of mushers who frequent the Alaskan Iditarod Races. Moccasin style tongue and forefoot eliminate stitching and seams over the instep and forefoot, providing maximum warmth and comfort, while gently hugging the foot.

They come up a little higher than the Alfa Polar liner.

This model can be worn ‘out of the box’ or moulded by a Boot Fit retailer.

12mm Sole, Anti-Microbial Lining Treatment, Medium volume, No Laces, Super Soft Foam Construction, Tongue style liner

Fjellpulken Xpedition Pro reinforced skier harness is a very solid harness designed for people using the pulk a lot or training with tyres, or longer expeditions. 

Xpedition Pro is an elaborate harness with a well-padded belt around the waist, as well as a cross strap with a relief cushion over the shoulder and neck area. The harness also has reinforcements at all exposed wear sites. As with the Fjellpulken standard sled harness, you can also click off shoulder straps if you wish.

Weight 1kg

Fjellpulken Standard Skier Harness

The Fjellpulken Standard Skier Harness is a solid harness designed for pulling a pulk. Ideal for shorter trips and lighter loads. This has been in service for many years, and is a firm favourite for back country pulk hauling or shorter expeditions on the ice.

It is produced with heavy duty nylon material and is equipped with comfortable padding around the waist. The shoulder straps are included, but can be removed, and are there to make sure the belt doesn't sags too low on your hips - and they are also of great assistance when pulling the pulk upwards in steep terrain.

All buckles are of well known UTX/Flex and ITW Nexus quality and makes sure the belt feels comfortable and stays in place.

A classic harness which will serve you well.

Weight:

NEW -

We've had so many requests for a tyre pulling set up, that we've decided to carry the pre-made rig from Fjellpulken. Developed in conjunction with Polar Expedition athletes, the training rope assembly is designed to make tyre pulling comfortable yet realistic.

Fjellpulken Taudrag is ready for use for sledding and tyre training / tyre pulling or other activity where you are going to pull something.

Made of solid rope with secured knots and 12K carabiner hooks for easy connection to tyres and harnesses or backpacks.

Eye hook for mounting on tyre is included.

About 2.7 meters length + hiking in elastic.

For Shipping costs outside the UK, please email us at email@nordiclife.co.uk 

A NEW and EXCITING member of the Asnes Ski Family. This could very well become the gold standard for expedition skis.

Delivery 7-10 Days.

 Børge Ousland BC is a very light and versatile ski that fits down cross country tracks. A ski with a solid steel edge (2.1x1.9 mm) and a very lightweight wooden core, which is equally suitable for long trips and expeditions with pulk, as for days in hard and icy ski tracks. Because we use same steel edge on our mountain skis as is used on most alpine skis, we can guarantee good edge control on all conditions and high-level durability. This ski has a prominent camber profile which stetches in the length of the ski and a distinctive wax pocket, something which makes for an excellent ski for trips where good glide is essential. This ski also comes with a sole that has good wax absorption, is very durable and grinded to work in Nordic conditions– perfect for long outings in Nordic and Polar snow conditions.

Ousland BC ski has a moderate side cut so that the ski is directional, but also turns easily on hard snow. A soft front tip with the Nordic Rocker (lifted tip) and Taper (secluded widest point on the tip) makes for a ski that handle difficult conditions in the mountains well and floats more easily. This ski has a light wooden core in poplar and paulownia, which gives a playful, solid ski with good camber and very low weight. Børge Ousland BC weighs only just over 800 grams per ski in 200 cm length - then there is none bordering on how long and long you can ski!

The longitudinal stiffener and the construction of the Børge Ousland BC ski has good bearing capacity. This ski has been developed in close cooperation with the polar explorer, Børge Ousland, known as one of the most reputable adventures in modern polar history. Børge Ousland was the first man to reach the North Pole without supplies and support in 1990 together with Erling Kagge. In 1994 he went alone to the North Pole and on to Kapp Arkichevsky in Russia, the first in the world, and in 1996/1997 he was the first in the world to cross in and out of the South Pole without supplies, which also was the fastest entry into the South Pole in just 34 days. Since then, Børge Ousland has been at the North Pole during the winter and made several remarkable expeditions before in later years have lived of lectures, as an expedition organizer and on the island Manshausen in Steigen. We are proud to be able to work with Børge Ousland and we look forward to further cooperation and think it is great that we can benefit from his stories and advice.

Length - 180,190,200,210

Width 66 52 60

Weight 825 g per ski (200 cm)

Material - poplar and paulownia

Constr. - cap

Binding - BC

For Shipping costs outside the UK, please email us at email@nordiclife.co.uk 

AMUNDSEN BC SKINLOCK - The choice of Expeditions to the Poles, Greenland and most cold inhospitable places! In our experience, it's the best balance between robustness, weight, tracking and floatation for those hauling sleds for days on end.

Special Order: 8-14 Days

Amundsen BC is a ski for the long mountain trek. With a full steel edge and a prominent wax pocket for a lasting grip, it is stiff and reassuringly stable – perfect for longer excursions and expeditions with the weight of a backpack or sled.

All Åsnes skis are compatible with the new X-Skin. So although the Amundsen BC is narrow enough for groomed tracks, a climbing skin can be attached in an instant when it is time for that long mountain ascent.

Roald Amundsen (1872–1928), the first man to reach both the South and North Poles, was a polar explorer, discoverer, researcher and flight pioneer. He navigated the Northwest Passage and was a pioneer in the use of airships and planes in polar research.

Length: 170,175,180,187,194,201,208

Width:  67 57 62

Weight : 1010 g per ski (201 cm)

Material: poplar woodcore

Construction : cap

Binding: BC

steel edge

skin insert

sinter and waxable

item no. 542001